Low Voltage Switchgear
Motor Protection Switches MS18
Start-up and protection of electric motors.
Motor Protection Switches MS25
Motor protection circuit breakers are special type of circuit breakers, designed for protection of wide range of single-phase and three-phase AC motors against overload and short circuit. They are used in industry, small machines, agricultural ...
Motor Protection Switches MS32
Motor protection circuit breakers are special type of circuit breakers designed for protection of wide range of single-phase and three-phase AC motors against overload and short circuit. They are used in industry, small machines, agricultural ...
Latching relays / Bistable Switches
Latching relays or bistable switches are switching devices with two stable states for switching of all kind of electric loads. Those switches operate without power consumption in operating switch-on position and with a very small consumption ...
Mini contactors
Contactors are electrically remote controlled switches used for switching a power circuit. Contactors are mainly used for switching motors, building automation systems and applications including use in machines. Looking for a highly ...
Contactors KNL6 - KNL38
Contactors are electrically remote controlled switches used for switching a power circuit. Those contactors are mainly used for switching electric motors and other resistive, inductive and capacitive loads. Looking for a highly reliable ...
Contactors KNL6G - KNL30G
KNL6G contactor relays are mainly used for switching control and signal circuits, and KNL9G-KNL30G motor contactors are used for switching motors and other resistive, inductive and capacitive consumers.
Contactors KNL43 - KNL75
Contactors are an electrically remote controlled switches used for switching a power circuit. Those contactors are mainly used for switching electric motors, pumps, compressors, systems for energy alternative sources, lamps etc. Looking ...
Contactors KNL 80 - KNL110
Contactors are used for switching electric motors and otherresistive, inductive and capacitive loads (lifting equipment, pumps, fans, industry, etc.).
Capacitor Duty Contactors KC12 - KC60
Switching of capacitors in systems for compensation of reactive energy (classic automation devices).
Auxiliary Contactors K0
Auxiliary contactors from Iskra have high mechanical endurance, high contact reliability and provide fast and easy fixation. They are designed for switching currents by being an additional motor starter. Auxiliary contactors help you: ...
Contactors KNL95 - KNL630/1000
Contactors are used for switching electric motors and otherresistive, inductive and capacitive loads (Mills, fans, liftingequipment, transport systems, pumps, shipyards, ironworks, industry, etc.).
Contactor Combinations
Motor starters are used for start-up, overload protection and switch-off of electric motors.
Installation contactors with manual operation up to 25 A (IK-R)
Installation contactors are the most flexible switching devices for use in all types of applications. Those are applied for automatic control of electric devices in installations of dwellings, offices, shops and hospitals. Looking for ...
Installation Contactors up to 63 A (IK)
Installation contactors are the most flexible switching devices for use in all types of applications. Those are applied for automatic control of electric devices in installations of dwellings, offices, shops and hospitals. Looking for ...
Installation contactors up to 63 A (IK UL)
Installation contactors are the most flexible switching devices for use in all types of applications. Those are applied for automatic control of electric devices in installations of dwellings, offices, shops and hospitals. Looking for ...
Single-pole Lightning current and surge arresters - Class I / (B+C)
ISPRO BS(R) 50, ISPRO BS(R) 25, ISPRO-G BS The series ISPRO BS(R) in ISPRO-G BS of low cost, over voltage surge protective devices has been developed to protect against partial direct and indirect lightning discharges and is intended to provide ...
Multi-pole Lightning Current and Surge Arresters - Class I (B+C)
ISPRO-K BS(R) 75 (3+0) , ISPRO-K BS(R) 100 (4+0), ISPRO-K BS(R) 100 (3+1), ISPRO-K BS(R) 37,5 (3+0), ISPRO-K BS(R) 50 (4+0), ISPRO-K BS(R) 50 (3+1), ISPRO B2N8R) 12,5 The series of over voltage surge protective devices has been developed ...
Single-pole and multi-pole surge arresters - Class II / (C)
ISPRO C(R) 40, ISPRO C(R) 80 (1+1), ISPRO C(R) 120 (3+0), ISPRO C(R) 160 (4+0), ISPRO C(R) 160 (3+1) The ISPRO C(R) series of low cost, over voltage surge protective devices has been developed to protect against partial direct and indirect lightning ...
Single-pole and multi-pole surge arresters - Class III / (D)
ISPRO D(R) 10, ISPRO DM(R) (2+0), ISPRO DMG(R) (2+0) The ISPRO D, DM and DMG series of overvoltage surge protective devices has been developed to protect against indirect lightning discharges and induced voltages. It is intended to provide ...
Multi-pole Lightning Current and Surge Arresters for Photovoltaic Systems - Class I (B+C) and Class II (C)
The PV ISPRO BS(R) and PV ISPRO C(R) series of over voltage surge protective devices has been developed to protect against indirect lightning discharges and is intended to protect photovoltaic system.
Single-pole and multi-pole lighting and surge arresters for Wind Generation System - Class II / (B+C)
The WT ISPRO series has been developed to meet the growing needs of wind generation facilities where exposure to direct and indirect lightning discharges is well known problem, primarily due to the often exposed location of such facilities ...
Surge Arresters for Overhead Power Lines
The ISPRO AQ 40 series of over voltage surge protective devices has been developed to protect against indirect lightning discharges on overhead power lines.
Residual Current Circuit Breakers NFI
With a residual current circuit breaker (RCCB) the following protective measures are available: fault protection, protection against fire and additional protection in case of direct contact. They are also suitable for isolation and have ...
Residual Current Circuit Breakers RFI2
RFI2 is a combination of a residual current circuit breaker and a miniature circuit breaker. With RFI2 the following protective measures are available: fault protection, protection against fire and additional protection in case of direct ...
Miniature Circuit Breakers RI 50
Miniature circuit breakers of RI series are used for switching, conducting and switching-off the current not only in normal operating conditions but also in special conditions in a circuit such as short circuit. They are used for overcurrent ...
Miniature Circuit Breakers RI 60
RI 60 miniature circuit breakers are provided with two springs namely for mounting on 35 mm wide rail (EN 60715). As optional operation position a handle can be set up in ON or OFF position. Degree of protection IP20 and degree of protection IP40 ...
Miniature Circuit Breakers RI 120
Miniature circuit breakers of RI series are used for switching, conducting and switching-off the current not only in normal operating conditions but also in special conditions in a circuit such as short circuit. They are used for overcurrent ...
Installation built-in device RV 60, RV 120, RS
They are used as main switches in house distribution boxes or as switches for individual electric circuits.
Miniature Circuit Breakers RI 20
Miniature circuit breakers of RI series are used for switching, conducting and switching-off the current not only in normal operating conditions but also in special conditions in a circuit such as short circuit. They are used for overcurrent ...
Surface mounted (INO) and flush mounted (IPO) compact distribution boards
Surface and flush-mounted distribution boards apply in domestic and industry architecture for mounting modular equipment for protection (IP40, IP65) against dust and another dirtiness.
Switch disconnectors DS
Used as main and emergency-off switches, maintenance switches or as safety switches.
Switch disconnectors DSPV
Switch disconnectors series DSPV with double breaking system completely fulfil requirements for isolation according to IEC 60364-7-712 for photovoltaic installations. Switch disconnectors are designed to be placed between photovoltaic ...
Moulded Case Circuit Breakers
MOD series moulded case circuit breakers are used for switching and protecting low-voltage installations in large residential properties and business as well as industrial buildings. They ensure reliable protection against overload ...
Time relays
Time relays TRE 701 to TRE 706 are suitable for many different applications. They can be one-function or multifunction and cover from simple to sophisticated time functions.They can be delivered in many varieties according to operating ...
NDR-2/A, NDR-2/B
Programmable digital relay NDR-2/A, NDR-2/B - Multifunction programmable digital relay with 4 digit red LED display
DTS 1, DTS 2, DTS 3, DTS 5
Digital time switch clock DTS 1, DTS 2, DTS 3, DTS 5 - This time switch clock is used to control various appliances in real time; daily, weekly, monthly and annual mode.
Inductive proximity switch (Φ4, M8)
Detect a metal object without touching it and causing damage to the object. Noncontact measurement of position, displacement and distance, suitable for detecting metals.
Inducitve proximity switch (Φ12, M12)
Detect a metal object without touching it causing damage to the object. Noncontact measurement of position, displacement and distance, suitable for detecting metals.
Inductive proximity switch (Φ20, M18)
Detect a metal object without touching it and causing damage to the object. Noncontact measurement of position, displacement and distance, suitable for detecting metals.
Inductive proximity switches (Φ30, Φ40, Φ80, M30, M45, M47)
Detect a metal object without touching it and causing damage to the object. Noncontact measurement of position, displacement and distance, suitable for detecting metals.
Capacitive proximity switches (Φ20, Φ30, Φ40, Φ80, M12, M18, M30)
Detect a metal object without touching it and causing damage to the object. Noncontact measurement of position, displacement and distance, suitable for detecting metals and nom-metals - solid, grains, liquids.