Power meters are electronic meters intended for measuring active or reactive power in single phase or three-phase networks, with balanced or unbalanced load. The accuracy class is 1.5. The scale ...
Power factor meters are intended for measurement of power factorb (cosϕ) in a three-phase three-wire network with a balanced load of phases or in a single phase network. The accuracy class is 1.5.
Reed frequency meters are intended for measurement of frequencies in the range from 45 Hz to 65 Hz. Two-system reed frequency meters are intended for measurement of two frequencies in the system for ...
The MI 7350 can signal minimal and maximal setting limits (MIN and MAX). The meter is provided with two output relays of 600 VA switching power. Setting over or under the limits is displayed with a ...
Meters with a moving coil are intended for measurement of direct currents or voltages. A measuring system with a core magnet is not sensitive to external electromagnetic fields and is resistant to ...
TAP meters with a moving coil are intended for measurement of tap position with auxiliary supply AC voltage. The position indicator monitors transformer tap position, hoist or valve position etc. It ...
Meters with a moving coil and a rectifier are intended for measurement of AC currents or voltages in the frequency range from 40 Hz to 65 Hz (higher frequency range on request), where low meter ...
Owing to a special form and available colours, BN and CN meters are especially convenient for building into different control devices. The accuracy class is 1.5. The scale is not interchangeable. BN ...
Meters with a moving iron are intended for measurement of AC currents or voltages of frequencies from 15 Hz to 100 Hz. They measure rms values independently on the signal form of current or voltage.
Bimetal maximum current meters with a bimetal measuring system are intended for testing the thermal load of transformers, cables, electrical machines, etc. They indicate average rms current value in a ...
Combined bimetal maximum current meters are provided with a built-in bimetal system and a system with a moving iron. The meters are intended for testing momentary and thermal load of transformers, ...
DM 206 - Digital Panel Voltmeter measures very accurately, the voltage value of the any line (AC+DC) in true RMS. Any line can be measured between 0...500 V.
DM 208 - Digital Panel Ampermeter measures very accurately, the current value of the any line (AC+DC) in true RMS. Any line can be measured between 0...9999 A. When the reading excesses 9999 A, it ...
DM 306 - Digital Panel Voltmeter measures very accurately, the voltage value of the any line (AC+DC) in true RMS. Any line can be measured between 0…500 V
DM 308 - Digital Panel Ampermeter measures very accurately, the current value of the any line (AC+DC) in true RMS. Any line can be measured between 0…9999 A. When the reading excesses 9999 A, it shows ...
DM 310 is very advanced multimeter which gives user precise readings in 4 digits and seperate CT ratio adjustments for flexible systems. It is not only measures the current pulled from the L1, L2, L3, ...